Commercial Flooring: Under-Floor Surfaces For Natural Stone Carpets

All-natural Stone Carpets are specially created for application to any type of fixed below-floor. This must, then again, be dry and zero cost of dust. Any old adhesives have to initial be removed. The floor temperature should certainly be at least 12NC.

Concrete and Cement-Bonded Floors

Laying a Natural Stone Carpet on a concrete or cement-bonded floor is normally not a situation for trained personnel provided the floor is up to the top quality normal needed. Which signifies it should be even and totally free of chips. To avoid any contraction/expansion of the under-floor it is advised the incorporation of shrink netting, 6-150mm diameter in the sand/cement layer. You can usually arrange this in advance with the contractor.

Where sand/cement floor is currently in location, a flexible membrane can be implemented to compensate for any contraction in the below-floor and prevent cracking. The below-floor will be sufficiently hardened and dried soon after 28 days for the Natural Stone Carpet to be laid. Based on the below-floor, the primer may possibly be applied and the All-natural Stone Carpet laid in 1 or two days.

Tiled and Flagged Floors

Tiles and flagged flooring does not in most cases have to be removed.  Loose tiles or joints must but be removed. On the very first day of laying, a specific tile primer will need to be applied to make sure maximum adhesion. Any unevenness in the tiled floor will be leveled out on the second day when the Natural Gravel Floor is becoming laid.  Bear in mind that tiled and flagged floors at all times require an extra quantity of the All-natural material.