Commercial Flooring: Under-Floor Surfaces For Natural Stone Carpets

Natural Stone Carpets are specially designed for application to any type of fixed below-floor. This ought to, then again, be dry and zero cost of dust. Any old adhesives need to to begin with be removed. The floor temperature will need to be at least 12NC.

Concrete and Cement-Bonded Floors

Laying a All-natural Stone Carpet on a concrete or cement-bonded floor is frequently not a difficulty for educated personnel offered the floor is up to the quality common necessary. Which means it must be even and zero cost of chips. To prevent any contraction/expansion of the under-floor it is advised the incorporation of shrink netting, 6-150mm diameter in the sand/cement layer. You can typically arrange this in advance with the contractor.

Exactly where sand/cement floor is already in place, a flexible membrane can be utilised to compensate for any contraction in the under-floor and stop cracking. The below-floor will be sufficiently hardened and dried right after 28 days for the All-natural Stone Carpet to be laid. Depending on the below-floor, the primer can be applied and the All-natural Stone Carpet laid in 1 or two days.

Tiled and Flagged Floors

Tiles and flagged flooring does not usually have to be removed.  Loose tiles or joints should really still be removed. On the first day of laying, a unique tile primer want to be applied to guarantee maximum adhesion. Any unevenness in the tiled floor will be leveled out on the second day when the All-natural Gravel Floor is becoming laid.  Bear in mind that tiled and flagged floors always demand an further quantity of the All-natural material.